Friday, March 29th, 2024

Signal options for catchers

January 24, 2014 by  
Filed under Catching, Pitching

Yesterday’s post was about catchers giving signals during throwing sessions.  I thought I’d give a few options for catchers when it comes to giving signs.

The options below are generally done when there is a runner at second base.  You mix the signs up so that

Not too obvious.  Not too complicated.

Not too obvious. Not too complicated.

the runner will not know what the pitch will be and therefore cannot relay the info to the hitter or use it to help him time a steal of third base.

When coming up with your mix of signals, you want them to be tough to decipher but not too complicated for your own guys.  There are many complicated methods of giving signs but sometimes they do more harm then good.  Pitchers and middle infielders have enough on their minds already.  They don’t need complicated signs taking up a lot of brain space.

Below are a few options ranging from basic to advanced.  There are certainly others so feel free to make up your own as needed.

Basic:

First sign / Second sign / Last sign – Pretty simple.  The catcher’s first sign, second sign, or last sign in the sequence is the pitch. If it is the second or last sign and the pitcher shakes him off, it usually switches to the first sign after that to confuse the runner and quicken the process.

Intermediate:

First sign after two – The catcher gives a few signs but the pitch he wants is the next sign after he puts down two fingers.  Example:  1-3-2-1-3 would be a fastball since the 1 (fastball) appeared after the 2.  2-2-1-3 would be a curveball or whatever else two fingers meant.  Whatever number is flashed after the first 2 is the pitch.

Pumps – In this example, it doesn’t matter what fingers the catcher puts down.  The pitcher just counts the pumps or how many times the catcher puts fingers down.  Example:  2-1-3 would be three “pumps.”  Three could mean a slider or maybe something else.   This is where it gets tricky if you are a bit older – high school and up.  Put one pump down for a fastball and the runner will quickly figure out what you are doing – which is “pumps.”  To get around this, let’s say I throw three pitches – a fastball, a slider, and a change-up.  Pump #1 = fastball, Pump #2 = slider, Pump #3 = change-up, and Pump #4 = fastball again!  Adding one extra pump and making that a fastball too works well.  Know your pitchers though.  Some pitchers get so worked up on the mound that a simple counting exercise becomes difficult.  Match the signal option to the needs of the pitcher.

Touches – This is similar to the first sign/last sign option but instead of putting fingers down, the catcher touches parts of his body like a coach would in the third base coaching box.  This one is good during low light conditions or when night-game lights create shadows making it tough for pitchers and middle infielders to see the signs flashed in the normal location.  Click HERE for another option in low-light conditions.  I’ve seen some pitchers (Jamie Moyer comes to mind) who will make this system more complicated by doing both signs and touches – the sign for the pitch and the touch for the location or vice versa.  I think this is a bit too complicated but if it works, go for it.

Advanced:

Indicator plus pumps – Let’s say a pitcher has four pitches – fastball, curve, slider, change-up.  Like before, you make the fifth pitch another fastball so it’s now 1=fastball, 2=curve, 3=slider, 4=change-up, 5=fastball.  For this sequence, the catcher’s first sign is the indicator that tells the pitcher which number to start with in the sequence.  If his first sign is three fingers then each pump after that adds to the three.  Example:  2 – 1 – 3 would be a change-up because the catcher started with #2 and then added two more pumps after that.  2 + 2 = 4 (change-up).  3 – 2 – 3 – 2 would be a fastball because the first sign started at #3.  Three pumps took it back to #1 which is a fastball.  Pop-Quiz:  what is 1 – 3 – 1?   If you said slider, you are correct.  #1 was the indicator and two more pumps took it to #3 (1+2=3) which is a slider.

Sign / Pump mix – The Sign / Pump Mix are the same as before but in this option, which one you use depends on the inning.  Odd numbered innings might require a simple sign (first sign, second sign, etc.) and even numbered innings use the pump option.  I’m not a big fan of this one either but again, to each his own.

One final note.  Just because you are at the high school, college, or professional level doesn’t mean you have to use the more advanced options.  If you pay attention to those who might be stealing signs and change them up according, keeping things relatively simple is usually best. 

Next post:  Product review: The Three Piece Tee

 

5 comments on “Signal options for catchers

  1. Ryne Jungling on said:

    Just one additional comment on low light options. I know that this has been around for a while, and Kurt Suzuki was the first to use this option back when he was in college, but my catchers use whiteout on their finger tips and backs of their fingers and that seems to work well.

    • Thanks for the tip Ryan. The link in the post sends you to a site where white stickers can be used. Boys aren’t always too excited to wear nail polish! Thanks again!

      • Ryne Jungling on said:

        That is absolutely the case! Before the new stickers, I have been able to tell them that Posada and Suzuki use it in the bigs and that worked alright for them. But things are changing…

  2. Do you have any suggestions for coaches signs being relayed to the catcher? I want to relay pitch type and location without it getting too complicated for the catcher or too obvious. Thanks.

    • Usually it is done through touches to the face. For example, 1st touch could be pitch (nose = FB) and last touch could be location (rt ear outside). If you use your index finger, touches that go nose-chin-nose-ear-hat-ear would be outside fastball. Mix it up anyway you like.

Leave a Reply

Your email address will not be published. Required fields are marked *

*

* Copy This Password *

* Type Or Paste Password Here *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>